Charger 6/12V 10A NOCO GENIUS10

Smart charger 6/12V 10A NOCO GENIUS10

With a 10 A output it spans everything from a motorcycle battery to the large units in vans, motorhomes, boats or tractors: it charges up to 230 Ah and maintains batteries of any capacity. A 100 Ah battery at half charge is ready in about 7.5 h; a 40 Ah one in about 3 h.

It works at 6 V and 12 V with lead-acid (AGM, EFB, gel, calcium, MF, flooded) and at 12 V with lithium that has a BMS, LiFePO4 included. Charging starts from 1 V, and force mode allows it from 0 V.

Two extra functions set it apart from the smaller models: a repair mode for sulphated or stratified batteries and a 12 V DC output that keeps vehicle memory settings alive during a battery swap.

Technical data

How to size it

• —  Its sweet spot is 40 to 230 Ah; for motorcycle or small batteries, a GENIUS2 (2 A) is better proportioned.
• —  For cars with batteries up to 120 Ah, the GENIUS5 (5 A) covers the range with half the current.
• —  Above 230 Ah or with 24 V banks, step up to the GENIUSPRO25: 25 A at 6/12 V and 12.5 A at 24 V.
• —  Does not charge 24 V batteries or 6 V lithium.

Features

• —  10 A charging current at both 6 V and 12 V, 150 W maximum.
• —  Recommended for batteries up to 230 Ah; maintenance with no capacity limit.
• —  12V, AGM, lithium, 6V, repair, 12V supply and force modes.
• —  Lithium at 12 V with a BMS only; all lead-acid types at 6 and 12 V.
• —  Thermal sensor corrects the charge in cold and heat; operates from -20 to +40 °C.
• —  IP65 housing, 183 x 94 x 59 mm, DC cable approx. 1.97 m.

In the box

• —  GENIUS10 battery charger
• —  Battery clamps with integrated eyelet terminals
• —  2 self-tapping screws
• —  User guide and warranty