On-board charger 12V 5A NOCO GEN5X1
A single 5 A output at 12 V in a sealed IP68 housing, designed to stay installed on the boat and sized for batteries up to 120 Ah.
On-board charger 12V 5A 1 bank IP68 NOCO GEN5X1
Intended as a permanent fit on boats, dinghies, sailing yachts, pontoons or personal watercraft running one 12 V battery. Its 5 A output covers batteries up to 120 Ah: a 100 Ah unit at 50 % depth of discharge is restored in roughly 15 h, a 40 Ah one in about 6 h.
It accepts every lead-acid variant (AGM, EFB, gel, calcium, MF or flooded) and 12 V lithium with a BMS, LiFePO4 included, each with a dedicated mode. The IP68 case can be bolted in any orientation, even upside down, on an anti-vibration backing.
A repair mode for sulphated batteries, a force mode to start charging from 0 V and temperature compensation between -20 and +40 °C complete the package.
Technical data
| Mains input voltage | 100-240 VAC, 50-60 Hz |
|---|---|
| Output power | 72 W max. |
| Charging banks | 1 |
| Charging current | 5 A (12 V) |
| Battery voltage | 12 V |
| Battery chemistries | Lead-acid (wet, gel, MF, calcium, EFB, AGM) and 12V lithium with BMS (incl. LiFePO4) |
| Battery capacity | Up to 120 Ah; maintains all battery sizes |
| Charging modes | 12V, 12V AGM, 12V Lithium, Repair and Force |
| Low-voltage detection | 1 V (Force Mode: 0 V) |
| Back current drain | < 0.5 mA |
| Operating temperature | -20 °C to +40 °C |
| Housing protection | IP68 |
| Cooling | Natural convection |
| DC cable length | approx. 1.83 m |
| Approx. charging time (50% depth of discharge) | 20 Ah: 3 h · 40 Ah: 6 h · 100 Ah: 15 h · 120 Ah: 18 h |
| Dimensions (L x W x H) | 117 x 74 x 48 mm |
| Weight | 0.84 kg |
How to size it
- — Matches a single 12 V battery up to 120 Ah; for larger batteries the GENPRO10X1 delivers 10 A and reaches 230 Ah.
- — With separate starting and house batteries on board, the GEN5X2 (2 banks) or GEN5X3 (3 banks) keep 5 A on each output.
- — 12 V only: not suitable for 6 V or 24 V banks.
- — For lithium, the battery must have a built-in BMS.
Features
- — Single 5 A output for 12 V batteries, 72 W maximum power.
- — Charges batteries up to 120 Ah: about 18 h to restore a 120 Ah battery at 50 % discharge.
- — 12V, AGM and lithium modes; lithium for 12 V batteries with a BMS, LiFePO4 included.
- — Recognises batteries from 1 V; force mode starts the charge even at 0 V.
- — Sealed IP68 housing, mountable in any position, with anti-vibration backing.
- — DC cable approx. 1.83 m; body 117 x 74 x 48 mm.
In the box
- — GEN5X1 on-board charger
- — 2 x #8 27 mm self-tapping screws
- — User guide and warranty
-
Brand
-
ReferenceEUR-NOCO-GEN5X1
-
MPNGEN5X1