Industrial charger 24V 40A NOCO GX2440

Industrial charger 24V 40A IP66 NOCO GX2440

An industrial charger for 24 V deep-cycle batteries in golf carts, scissor lifts, pallet trucks, floor scrubbers and utility vehicles. It supplies 40 A and is sized for batteries from 55 to 425 Ah, whether lead-acid (AGM, EFB, gel, calcium, MF, flooded) or lithium-ion, LiFePO4 included. It can be installed on board or used off the vehicle.

Its 960 W come from a 100-240 VAC input at roughly 92 % efficiency. Modes: NORM 28.8 V, COLD/AGM 29.4 V, AGM+ 31.2 V, LI-ION 29.2 V, repair at 32 V (5 A) and power supply at 27.2 V / 20 A.

One-piece IP66 aluminium housing, removable AC and DC cables, plus an inhibit port (20 A relay) and a remote LED port.

Technical data

How to size it

• —  Check the pack voltage: this model is for 24 V only, with batteries from 55 to 425 Ah.
• —  For 36 V there is the GX3626 (26 A) and for 48 V the GX4820 (20 A), both 960 W with the same Ah range.
• —  For 24 V starting or service batteries in vehicles, the GENIUSPRO25 and GENIUSPRO50 also charge at 24 V.
• —  Select the mode by chemistry: LI-ION for lithium, AGM+ or COLD/AGM for AGM.

Features

• —  40 A charging current at 24 V; 960 W maximum and roughly 92 % efficiency.
• —  Deep-cycle batteries from 55 to 425 Ah, lead-acid and lithium-ion (LiFePO4).
• —  NORM, COLD/AGM (below 10 °C or AGM), AGM+, LI-ION and repair modes.
• —  Power supply mode: 27.2 V / 20 A.
• —  One-piece IP66 aluminium housing; operates from -20 to +50 °C.
• —  Removable 1.93 m AC and DC cables; 304 x 215 x 100 mm and 6 kg.

In the box

• —  GX2440 industrial charger
• —  AC cable
• —  DC cable with heavy-duty eyelets
• —  User guide, information guide and warranty