Charger 6/12/24V 25A NOCO GENIUSPRO25

Professional charger 6/12/24V 25A NOCO GENIUSPRO25

One unit for the three voltages a workshop sees: 6 and 12 V at 25 A, 24 V at 12.5 A. It accepts up to 1000 Ah on 6 or 12 V batteries and 500 Ah on 24 V, so it serves cars, vans, lorries, motorhomes and boats. At 50 % discharge, 100 Ah is restored in about 3 h and 200 Ah in about 6 h.

In supply mode it provides 25 A at 12 V or 12.5 A at 24 V, ripple-free, for ECU programming or diagnostics. For small batteries (up to 200 Ah) or maintenance, the current can be limited to 5 A.

It handles lead-acid and lithium with a BMS (LiFePO4), with repair available at all three voltages and a force mode from 0 V.

Technical data

How to size it

• —  Covers 6 to 24 V; size it by the largest battery you will charge: 1000 Ah max. at 12 V, 500 Ah max. at 24 V.
• —  If the workshop handles truck batteries or banks up to 2000 Ah, the GENIUSPRO50 doubles the current (50 A / 25 A).
• —  For a single 12 V vehicle with a battery up to 230 Ah, the GENIUS10 is enough.
• —  IP20 housing with forced-air cooling: for indoor use, not exposed to the weather.

Features

• —  Charging current of 25 A at 6 and 12 V, 12.5 A at 24 V; 375 W maximum.
• —  Capacity range: 1000 Ah max. at 6 or 12 V; 500 Ah max. at 24 V.
• —  Supply mode: 25 A at 12 V or 12.5 A at 24 V, for diagnostics and programming.
• —  Current can be limited to 5 A for batteries no larger than 200 Ah.
• —  Repair at all three voltages; recognises batteries from 1 V and forces charging at 0 V.
• —  3 m silicone cables (8 AWG), flexible down to -40 °C, and a 30 A ANL fuse.

In the box

• —  GENIUSPRO25 charger
• —  Clamps with interchangeable connectors
• —  3 m DC cable
• —  30 A ANL fuse
• —  2 self-tapping screws
• —  EVA case
• —  User guide