On-board charger 12V 10A NOCO GENPRO10X1

On-board charger 12V 10A 1 bank IP68 NOCO GENPRO10X1

Once the on-board battery exceeds 120 Ah, the 5 A of the GEN series fall short and the GENPRO10 series takes over. This single-output model supplies 10 A at 12 V and covers batteries up to 230 Ah: a 100 Ah battery at 50 % is restored in about 7 h, a 230 Ah one in about 17.3 h.

It accepts AGM, EFB, gel, calcium, MF and flooded lead-acid, plus 12 V lithium with a BMS, LiFePO4 included. The IP68 housing, with anti-vibration backing, mounts in any position.

It offers a repair mode, a force mode to start from 0 V, thermal compensation from -20 to +40 °C and permanent connection without overcharging.

Technical data

How to size it

• —  One 12 V battery from 120 to 230 Ah: that is its range.
• —  If the battery does not exceed 120 Ah, the GEN5X1 (5 A, 72 W) is more compact at 117 x 74 x 48 mm.
• —  With two or more batteries, the same series offers the GENPRO10X2, X3 and X4 with 10 A per bank.
• —  12 V only; lithium must have a BMS.

Features

• —  One 10 A output for 12 V batteries; 150 W maximum power.
• —  Charges up to 230 Ah; maintains batteries of any size.
• —  12V, AGM, lithium (12 V with BMS) and repair modes.
• —  Detects batteries from 1 V; force mode for batteries at 0 V.
• —  Waterproof IP68 housing with anti-vibration backing, suitable for inverted mounting.
• —  145 x 122 x 71 mm and DC cable approx. 1.83 m.

In the box

• —  GENPRO10X1 on-board charger
• —  2 x #8 27 mm self-tapping screws
• —  User guide and warranty