Tester 12V 2000 CCA Lemania Energy T3

Battery tester 12V 100-2000 CCA Lemania Energy T3

First, look at the chemistry of your batteries. On lead-acid the T3 reads between 100 and 2000 CCA; on lithium the floor drops to 20 and the ceiling to 1000 CCA. Always at 12 V.

With that settled, it adds a check of the starting and charging circuits, flags damaged cells and reads to ten standards (SAE, EN, DIN, JIS, IEC, GB, BCI, MCA, CA and CCA). Results are shared through a QR code. It has no internal battery, so there is nothing to recharge, and it tolerates a reversed hook-up. It measures 80 × 80 × 22 mm, weighs 0.2 kg and has a 100 cm lead.

Technical data

How to choose

• —  Short lead: the T3 has 100 cm; if the battery sits far away, the T4 doubles it to 200 cm with the same sheet.
• —  24 V vehicles or printed reports? That is T11 territory.
• —  On lithium the ceiling is 1000 CCA; the T11 reaches 2000 on lithium too.
• —  Operating temperature range: 0 to 50 °C.

Features

• —  Only one voltage is accepted: 12 V.
• —  Lead-acid: readings between 100 and 2000 CCA.
• —  Lithium: readings between 20 and 1000 CCA.
• —  It also checks the starting and charging circuits.
• —  It flags damaged cells in the battery.
• —  Results are shared by QR code.
• —  No battery of its own, and protected against reversed connection.
• —  100 cm lead; works between 0 and 50 °C; 0.2 kg.