Direct-mount charger 12V 2A NOCO GENIUS2D

Direct-mount charger 12V 2A NOCO GENIUS2D

A charger for permanent installation, using a bracket and two screws, in the engine bay or locker of a car, boat, motorhome, lorry or lawnmower. There is no selector: once it has a battery and mains power it begins charging, and it can remain connected indefinitely without overcharging.

Its territory is 12 V lead-acid (AGM, EFB, gel, calcium, MF or flooded) up to 40 Ah, although it will also maintain larger batteries. Approximate times at 50 % discharge: 12 Ah in about 3 h, 24 Ah in about 6 h, 40 Ah in about 10 h.

The IP65 housing tolerates -20 to +60 °C, and its LED indicators report charge status, temperature and reversed polarity.

Technical data

How to size it

• —  Intended for one 12 V lead-acid battery up to 40 Ah that should always be ready without plugging anything in.
• —  It does not charge lithium or 6 V batteries: for those, the portable GENIUS2 (2 A, 6/12 V and 12 V BMS lithium).
• —  For several batteries at once, the GENIUS2X2 offers 2 banks of 2 A.
• —  For marine installations needing full waterproofing, the IP68 GEN series is the appropriate choice.

Features

• —  2 A charging current at 12 V; 28 W maximum and roughly 87 % efficiency.
• —  12 V lead-acid up to 40 Ah; also maintains larger batteries.
• —  No mode selector: fully automatic, recognising batteries from 1 V.
• —  Thermal compensation and an operating range of -20 to +60 °C.
• —  Mains and battery leads of 61 cm each, the battery lead with ring terminals.
• —  127 x 58 x 38 mm, 0.23 kg, supplied with mounting bracket.

In the box

• —  GENIUS2D battery charger
• —  Mounting bracket
• —  2 self-tapping screws
• —  User guide and warranty