Tester 12V 2 m cable Lemania Energy T4

Battery tester 12V with 200 cm cable Lemania Energy T4

The only difference between the T4 and its sibling, the T3, is lead length: 200 cm against 100 cm. If you usually test with the unit resting some way from the battery, that extra metre is the reason to pick it.

Otherwise the sheet is the same: 12 V batteries; a 2000 CCA ceiling on lead-acid (floor 100) and 1000 CCA on lithium (floor 20); starting and charging circuit checks; damaged-cell alerts; ten standards (EN, SAE, JIS, DIN, GB, IEC, CA, MCA, BCI and CCA); results by QR. It needs no charge of its own and withstands a reversed hook-up. 80 × 80 × 22 mm.

Technical data

How to choose

• —  Only pay for the long lead if you will use it: with the battery in reach, the T3 does the same with 100 cm.
• —  For printing or 24 V starter and alternator tests, the model is the T11.
• —  Before testing lithium, remember the ceiling: 1000 CCA.
• —  All its values refer to 12 V batteries.

Features

• —  The lead is 200 cm long, twice that of the T3.
• —  It tests 12 V batteries only.
• —  Lead-acid: from 100 up to 2000 CCA.
• —  Lithium: from 20 up to 1000 CCA.
• —  It also checks the vehicle's starting and charging.
• —  It warns of damaged cells and shares results by QR.
• —  It has no battery of its own and tolerates a reversed connection.
• —  Use from 0 to 50 °C, storage from -20 to 70 °C; 80 × 80 × 22 mm.