Dual-outlet flush inlet NOCO GCP2

15 A flush-mount power inlet, dual outlet, 45.7 cm lead NOCO GCP2

The GCP2 handles installations with two loads, for example a battery charger and an engine block heater: the flush inlet takes the extension lead outside and, inside, a 45.7 cm (18 in) lead ends in two outlets.

Both share the 15 A rated capacity of the assembly, with 14 AWG copper cable; add up the draw of both devices before connecting them.

It mounts on boats, trucks, trailers or motorhomes in a 51 mm hole with three self-tapping screws and no hard wiring. Snap cover with rubber gasket; 0.32 kg.

Technical data

How to size it

• —  Add up the draw of both devices: the total must not exceed 15 A.
• —  If you connect only one device, the NOCO GCP1 (40.6 cm), GCP1E (1.83 m) or GCP1EX (3.66 m) have a single outlet.
• —  With 45.7 cm of lead, the devices need to be close to the inlet.

Features

• —  Power inlet with integrated 45.7 cm (18 in) lead and dual outlet.
• —  15 A rated capacity; 14 AWG copper cable.
• —  51 mm (2 in) mounting hole, no hard wiring.
• —  Self-tapping screws for fibreglass, wood, plastic or metal.
• —  Snap cover and rubber gasket for a watertight seal; 0.32 kg.

In the box

• —  GCP2 port plug with 45.7 cm cord
• —  Pressure-fit cap
• —  3 self-tapping screws